适用范围 Scope of application
USB口增加智能识别IC,兼容市面上99%设备充电。
快充口适用于QC3.0标准快充设备快速充电,内置智能识别IC,兼容市面上99%设备充电.
引用标准Reference standard
CE(EN55022:2006+A1:2007/EN55024:1998+A1:2001+A2:2003/EN55024:1998+A1:2001+A2:2003)
输入特性Outputfeature
额定输入电压Rated input voltage
额定输入电压Rated input voltage12V
输入电压范围Input voltage range
输入电压范围交流The input voltage range of exchange 10.5V~18V
DC输入电流DCInput current
10.5V~18V满载时输入电流2.8A (max)
10.5V~18V Loaded input current: 2.8A (max)
内置智能识别芯片,可自动识别市面上99%的设备。
Built-in intelligent identification chip, can automatically identify 99% of equipment on the market.
峰值输入电流The peak input current
电源启动时最大峰值输入电流小于5A(负载时)
The peak input current for electrification is less than 5A (loaded)
效率Efficiency
在输入电压10.5V~18V DC,输出最大负荷下,充电器工作效率大于85%
The charger efficiency is greater than 85% with the input voltage 10.5V-18VDC, and maximum load output
输出特性Outputfeature
输出额定电压Ratedoutput voltage
USBA额定输出电压范围4.75V-5.25V.
USBA Rated output voltage 4.75V-5.25V.
快充额定输出电压范围3.6V-12V.
Quick charge rated output voltage range 3.6 V to 12 V.
输出电压Output voltage
空载输出电压: 4.90V ~ 5.25V
No-load output voltage: 4.90V ~ 5.25V
满载输出电压: 4.55V ~5.25V
Full load output voltage: 4.55V ~5.25V
快充 额定输出电压范围3.6V-12V.
No-load output voltage: 3.6V-12V.
额定输出电流Rated output curren
在CC模式下,USBA额定输出电流2.4A
Rated output USBA current in CC mode : 2.4A
在CC模式下,QC3.0快充额定输出电流: 3.6V-6.5V/3A,6.5V-9V/2A,9V-12V/1.5A
Rated output QC3.0 current in CC mode : 3.6V-6.5V/3A,6.5V-9V/2A,9V-12V/1.5A